|
|
 |
Airtech Pressure Strip
|
Pressure Strip is an uncured synthetic rubber designed to be placed in corners where pressure is difficult to apply with only a vacuum bag. Pressure Strip will cure on a 250°F (120°C) or a 350°F (176°C) layup in an autoclave or oven. Maximum use temperature is 450°F (230°C). Pressure Strip is used as an expendable item and discarded after each cure. Pressure Strip is applied on top of the release film in the corner of the layup prior to vacuum bagging.
Due to vendor restrictions, this product may not available in all geographical areas. Please call us or request a quote for details.
|
|
Request For Quote & Ordering Information
Catalog
Number |
Description |
UM |
Ship
Note |
Qty |
|
Click Here to View Closeout Specials
S&H - Freeman charges standard published UPS/FedEx shipping rates (unless freight is specified). All orders under $25 are subject to a $5 small order fee. International orders are subject to a $250 minimum order.
SO = Special Order, Minimum Quantities and Extended Lead Times May Apply.
HAZ-G = Hazardous material, cannot ship air, $20 surcharge applied for each package shipped ground
HAZ-A = Hazardous material, cannot ship air, no surcharge for ground shipping
FRT = must be sent by freight carrier due to size, weight, or hazardous classification
T = Thickness L = Length W = Width H = Height Dia = Diameter Rad = Radius
Net Wt. = Net Weight (shipping weight may be more)
|
|
|
|
