|
|
 |
Polyolefin and fluorocarbon films used to prevent adhesion of the laminate to the bleeder/breather layers
400285 Wrightlon 5200 blue fluoropolymer release film is designed to withstand temperatures to 500F while maintaining high elongation. Compatible with most resin systems, this product provides an effective release and will result in a glossy back surface of the laminate. Not perforated. Sold in a full roll only.
400290 Wrightlon 5200P3 Blue Fluoropolymer is perforated with 0.015” diameter holes spaced on staggered ¼” centers. Sold by the foot or by the full roll.
400292 Wrightlon 5200P3 Red Fluoropolymer is perforated with 0.015” diameter holes spaced on staggered ¼” centers. Sold by the full roll only.
401304 & 401313 Airtech A4000R red fluoropolymer release film is designed to withstand temperatures to 500F while maintaining high elongation. Compatible with most resin systems, this product provides an effective release and will result in a glossy back surface of the laminate. Not perforated. Sold in a full roll only.
401430 Wrightlon 5200R Slit is the standard 50” wide Wrightlon 5200R release film, that is slit in 11 places to create 12 individual rolls that are 4” wide. Convenient for people using large quantities of 4” wide material. Not perforated and red in color.
401310 Airtech A4000RP is perforated to permit controlled resin flow into the bleeder layer. Perforations are 0.045” diameter on staggered ¼” centers. Sold in a full roll only.
401315 Airtech A4000RP8 is also perforated but with smaller holes spaced much further apart. Perforations are 0.015” diameter on 8” centers. Sold in a full roll only.
401320 Airtech A4000RP3 is also perforated with 0.015” diameter holes but the spacing is on staggered ¼” centers. Sold in a full roll only.
400250 Airtech Dahlar Release Bag 125 P3 is a polyolefin release film designed for lower temperature requirements less that 275F and is compatible with most resin systems. This product is also perforated the control resin flow into the bleeder layer. Perforations are 0.015” diameter on staggered ¼” centers. Sold by the foot or by the full roll.
Due to vendor restrictions, this product may not available in all geographical areas. Please call us or request a quote for details.
|
|
Request For Quote & Ordering Information
Catalog
Number |
Description |
UM |
Ship
Note |
Qty |
|
Click Here to View Closeout Specials
S&H - Freeman charges standard published UPS/FedEx shipping rates (unless freight is specified). All orders under $25 are subject to a $5 small order fee. International orders are subject to a $250 minimum order.
SO = Special Order, Minimum Quantities and Extended Lead Times May Apply.
HAZ-G = Hazardous material, cannot ship air, $20 surcharge applied for each package shipped ground.
HAZ-A = Hazardous material, cannot ship air, no surcharge for ground shipping.
HAZ-T = Toxic material, must be sent by freight carrier.
FRT = must be sent by freight carrier due to size, weight, or hazardous classification.
T = Thickness L = Length W = Width H = Height Dia = Diameter Rad = Radius.
Net Wt. = Net Weight (shipping weight may be more).
|
|
|
|
