|
|
 |
Airtech Safelease 30
|
Safelease 30 is a water based P.T.F.E. release agent that contains no silicones or silanes. Safelease 30 can be used for cure cycles up to 450°F (232°C). Safelease 30 can be used on composite and metal tools and provides a superior release from epoxies, phenolics, BMI's and urethane resin systems. Safelease 30 does not attract moisture so steam does not develop on the mold surface during cures. Safelease 30 is the only water based release agent that works on composite molds without needing a sealer. One coat allows multiple releases. Safelease 30 is an air dry system. Heat cure is not necessary.
Due to vendor restrictions, this product may not available in all geographical areas. Please call us or request a quote for details.
|
|
Request For Quote & Ordering Information
Catalog
Number |
Description |
UM |
Ship
Note |
Qty |
|
Click Here to View Closeout Specials
S&H - Freeman charges standard published UPS/FedEx shipping rates (unless freight is specified). All orders under $25 are subject to a $5 small order fee. International orders are subject to a $250 minimum order.
SO = Special Order, Minimum Quantities and Extended Lead Times May Apply.
HAZ-G = Hazardous material, cannot ship air, $20 surcharge applied for each package shipped ground.
HAZ-A = Hazardous material, cannot ship air, no surcharge for ground shipping.
HAZ-T = Toxic material, must be sent by freight carrier.
FRT = must be sent by freight carrier due to size, weight, or hazardous classification.
T = Thickness L = Length W = Width H = Height Dia = Diameter Rad = Radius.
Net Wt. = Net Weight (shipping weight may be more).
|
|
|
|
