|
|
 |
HONEYCOMB 180°
For low-temperature, composite-tooling applications.
This fabricated tooling panel is built from fiberglass and epoxy skins with a perforated and corrosion-resistant aluminum core for up to a 180°F working temperature. Each surface contains two plies of 10-once fiberglass (.030 total thickness). Its surface is protected with high-quality peel ply for ready bonding and highly stable composite tooling.
HONEYCOMB 425°
For high-temperature tooling operations.
This aluminum Honeycomb panel is fabricated with fiberglass skins and high-temperature resins. A perforated, corrosion-resistant core and 2 plies of 10-once fiberglass cloth provide strength and stability. Bonded under pressure for greater peel strength. Peel ply is applied for good bonding surface.
|
|
Request For Quote & Ordering Information
Catalog
Number |
Description |
UM |
T |
W |
L |
Ship
Note |
Qty |
|
Click Here to View Closeout Specials
S&H - Freeman charges standard published UPS/FedEx shipping rates (unless freight is specified). All orders under $25 are subject to a $5 small order fee. International orders are subject to a $250 minimum order.
SO = Special Order, Minimum Quantities and Extended Lead Times May Apply.
HAZ-G = Hazardous material, cannot ship air, $20 surcharge applied for each package shipped ground
HAZ-A = Hazardous material, cannot ship air, no surcharge for ground shipping
FRT = must be sent by freight carrier due to size, weight, or hazardous classification
T = Thickness L = Length W = Width H = Height Dia = Diameter Rad = Radius
Net Wt. = Net Weight (shipping weight may be more)
|
|
|
|
