FMSC - Carbide-Tipped Router Bits

Back to: Home >> Hardware & Equipment >> Assorted Cutters & Bits

Carbide-Tipped Router Bits

Many pattern shops find that, although Carbide Tipped Router Bits are more expensive than the standard high speed steel bits, their faster cutting capabilities and longer wear life more than make up for the cost difference.
Our Carbide Tipped Router Bits feature - high hook angles, large gullets, high tungsten alloy steel shank and complete radial relief on the carbide and on the high chrome. The radial relief improves cutting efficiency and strength of the bit. Up to 20 regrinds are possible on these bits. All bits are warranted against braze failure under normal applications.

View Technical Library

Coming soon

Request For Quote & Ordering Information

Catalog Number	Description	UM	Mfg. No.	L	Ship Note	Qty
043374	Carbide-Tipped Router Bits - 1/4" Shank Diameter, 3/16" Cut Diameter, 1 Flute	EA	68002	1/2"
043382	Carbide-Tipped Router Bits - 1/4" Shank Diameter, 1/2" Cut Diameter, 2 Flutes	EA	68146	1"
043386	Carbide-Tipped Router Bits - 1/2" Shank Diameter, 3/8" Cut Diameter, 2 Flutes	EA	68520	1-1/4"
043392	CLOSEOUT Carbide-Tipped Router Bits - 1/2" Shank Diameter, 1/2" Cut Diameter, 2 Flutes CLOSEOUT	EA	68548	2"
043396	Carbide-Tipped Router Bits - 1/2" Shank Diameter, 5/8" Cut Diameter, 2 Flutes	EA	68568	1-1/4"
043398	Carbide-Tipped Router Bits - 1/2" Shank Diameter, 3/4" Cut Diameter, 2 Flutes	EA	68590	1-1/4"
043400	Carbide-Tipped Router Bits - 1/2" Shank Diameter, 7/8" Cut Diameter, 2 Flutes	EA	68610	1-1/4"
043402	Carbide-Tipped Router Bits - 1/2" Shank Diameter, 1" Cut Diameter, 2 Flutes	EA	68618	1-1/4"
043404	Carbide-Tipped Router Bits - 1/2" Shank Diameter, 1-1/8" Cut Diameter, 2 Flutes	EA	032-3640	1-1/4"
043406	Carbide-Tipped Router Bits - 1/2" Shank Diameter, 1-1/4" Cut Diameter, 2 Flutes	EA	032-4040	1-1/4"
043408	Carbide-Tipped Router Bits - 1/2" Shank Diameter, 1-3/8" Cut Diameter, 2 Flutes	EA	032-4440	1-1/4"
043410	Carbide-Tipped Router Bits - 1/2" Shank Diameter, 1-1/2" Cut Diameter, 2 Flutes	EA	032-4840	1-1/4"
043414	Carbide-Tipped Router Bits - 1/2" Shank Diameter, 1-3/4" Cut Diameter, 2 Flutes	EA	032-5640	1-1/4"
043418	Carbide-Tipped Router Bits - 1/2" Shank Diameter, 2" Cut Diameter, 2 Flutes	EA	032-6440	1-1/4"

Click Here to View Closeout Specials

S&H - Freeman charges standard published UPS/FedEx shipping rates (unless freight is specified). All orders under $25 are subject to a $5 small order fee. International orders are subject to a $250 minimum order.

SO = Special Order, Minimum Quantities and Extended Lead Times May Apply.

HAZ-G = Hazardous material, cannot ship air, $20 surcharge applied for each package shipped ground
HAZ-A = Hazardous material, cannot ship air, no surcharge for ground shipping
FRT = must be sent by freight carrier due to size, weight, or hazardous classification

T = Thickness L = Length W = Width H = Height Dia = Diameter Rad = Radius
Net Wt. = Net Weight (shipping weight may be more)