|
|
 |
Also referred to as milled cotton fibers, cotton flock is used as a filler to thicken epoxy resins or to promote adhesion between laminate layers. It offers dimensional stability and enhance compound strength. It is also used for patching and repairing surfaces, although it is not recommended for boat hull repairs. This filler is best suited in areas that will not be submerged or in constant contact with water.
Ren® RP 35 Ren Floc is derived from selected woods, is extremely white and contains only 0.1 to 0.2 percent ash. When dry, it’s at least 99.5% ellulose. Used to form paste materials with laminating resins.
|
|
Request For Quote & Ordering Information
Catalog
Number |
Description |
UM |
Net
Wt. |
Ship
Note |
Qty |
|
Click Here to View Closeout Specials
S&H - Freeman charges standard published UPS/FedEx shipping rates (unless freight is specified). All orders under $25 are subject to a $5 small order fee. International orders are subject to a $250 minimum order.
SO = Special Order, Minimum Quantities and Extended Lead Times May Apply.
HAZ-G = Hazardous material, cannot ship air, $20 surcharge applied for each package shipped ground
HAZ-A = Hazardous material, cannot ship air, no surcharge for ground shipping
FRT = must be sent by freight carrier due to size, weight, or hazardous classification
T = Thickness L = Length W = Width H = Height Dia = Diameter Rad = Radius
Net Wt. = Net Weight (shipping weight may be more)
|
|
|
|
