|
|
 |
Freeman 1090 Clear Polyurethane Elastomer
|
Formerly known as FMSC 1090 Clear, Freeman 1090 is a water clear urethane elastomer that is ideal for creating parts which require near-perfect clarity.
This product requires a 16 hour cure before demolding. It features a one to one mix ratio and low mixed viscosity which makes it excellent for pouring thin-walled parts.
Note: Part thickness greatly affects the curing rate of Freeman 1090. Thin-walled parts may require a post cure. Permit the material to solidify at room temperature and then heat cure the part in the mold at 110 to 150F for two to six hours. After cooling, the part is ready to demold.
|
|
Request For Quote & Ordering Information
Catalog
Number |
Description |
UM |
Net
Wt. |
Ship
Note |
Qty |
|
Click Here to View Closeout Specials
S&H - Freeman charges standard published UPS/FedEx shipping rates (unless freight is specified). All orders under $25 are subject to a $5 small order fee. International orders are subject to a $250 minimum order.
SO = Special Order, Minimum Quantities and Extended Lead Times May Apply.
HAZ-G = Hazardous material, cannot ship air, $20 surcharge applied for each package shipped ground.
HAZ-A = Hazardous material, cannot ship air, no surcharge for ground shipping.
HAZ-T = Toxic material, must be sent by freight carrier.
FRT = must be sent by freight carrier due to size, weight, or hazardous classification.
T = Thickness L = Length W = Width H = Height Dia = Diameter Rad = Radius.
Net Wt. = Net Weight (shipping weight may be more).
|
|
|
|
