FMSC - Malleable-Iron Rapping Plates

Back to: Home >> Foundry Tools & Supplies >> Other Foundry Tools & Supplies

Malleable-Iron Rapping Plates
Freeman Rapping Plates are made so that they have a marking edge cast into them. Placing the plate on the job and striking it with a hammer will make a layout of the cavity in which to insert the plate. All sizes have a threaded hole for draw screws and plain holes for rapping bar.

View the MSDS

Coming soon

Request For Quote & Ordering Information

Catalog Number	Description	UM	Dia	T	W	L	Ship Note	Qty
026005	Rapping Plates - Size No. 1	EA			5/8"	1-1/2"
026010	Rapping Plates - Size No. 5	EA			3/4"	1-5/8"
026015	Rapping Plates - Size No. 6	EA			3/4"	2-1/4"
026020	Rapping Plates - Size No. 8	EA			7/8"	2-1/4"
026025	Rapping Plates - Size No. 9	EA			1"	3"
026030	Rapping Plates - Size No. 10	EA			1"	3-1/2"
026035	Rapping Plates - Size No. 11	EA			2-1/4"	2-1/4"
026040	Rapping Plates - Size No. 12	EA			1-1/4"	3-3/4"
026045	Rapping Plates - Size No. 14	EA			1-1/4"	4-1/2"
026050	Rapping Plates - Size No. 16	EA			2-3/4"	2-3/4"
026055	Rapping Plates - Size No. 17	EA			3"	5-1/2"
026072	Round Rapping Plates - Size No. 0	EA	1"	5/16"
026074	Round Rapping Plates - Size No. 1	EA	1-1/4"	3/8"
026076	Round Rapping Plates - Size No. 2	EA	1-3/4"	1/2"
026078	Round Rapping Plates - Size No. 3	EA	2-3/8"	9/16"
026080	Round Rapping Plates - Size No. 4	EA	3"	5/8"
026082	Round Rapping Plates - Size No. 5	EA	4"	11/16"
026084	Round Rapping Plates - Size No. 6	EA	5"	3/4"

Click Here to View Closeout Specials

S&H - Freeman charges standard published UPS/FedEx shipping rates (unless freight is specified). All orders under $25 are subject to a $5 small order fee. International orders are subject to a $250 minimum order.

SO = Special Order, Minimum Quantities and Extended Lead Times May Apply.

HAZ-G = Hazardous material, cannot ship air, $20 surcharge applied for each package shipped ground
HAZ-A = Hazardous material, cannot ship air, no surcharge for ground shipping
FRT = must be sent by freight carrier due to size, weight, or hazardous classification

T = Thickness L = Length W = Width H = Height Dia = Diameter Rad = Radius
Net Wt. = Net Weight (shipping weight may be more)