FMSC - RenLam 188-10 Aluminum Filled High-Temperature Laminating System (Gray)

Back to: Home >> Liquid Tooling Materials >> Epoxy Laminating Resins >> High Temperature Laminating Resins

RenLam 188-10 Aluminum Filled High-Temperature Laminating System (Gray)


	4,000 cps Viscosity \| 55 Min Gel Time 90D Shore Hardness

Formerly TDT 188-10. This blue-gray, heat resistant epoxy laminating resin is suitable for constructing a wide variety of laminating tools that will be subjected to elevated temperatures. Maximum usage temperature is 300°F. Elevated postcure is required for optimum temperature resistance.

		View the specification table
		View the technical datasheet
		View the MSDS
		Video: Preparing Liquid Tooling Materials
		Video: Working with Epoxy Surface Coat and Laminating Resin

		Mold Releases
		Fiberglass Fabrics, Strand, & Tapes
		Mixing Cups, Gloves, and Paddles

Request For Quote & Ordering Information

Catalog Number	Description	UM	Net Wt.	Ship Note	Qty
056053	RenLam 188-10 Resin Only - Pail	EA	55
056054	Ren 188-10 Hardener Only - Pail	EA	31.6
056056	RenLam 188-10 Resin Only - Drum	EA	575

Click Here to View Closeout Specials

S&H - Freeman charges standard published UPS/FedEx shipping rates (unless freight is specified). All orders under $25 are subject to a $5 small order fee. International orders are subject to a $250 minimum order.

SO = Special Order, Minimum Quantities and Extended Lead Times May Apply.

HAZ-G = Hazardous material, cannot ship air, $20 surcharge applied for each package shipped ground
HAZ-A = Hazardous material, cannot ship air, no surcharge for ground shipping
FRT = must be sent by freight carrier due to size, weight, or hazardous classification

T = Thickness L = Length W = Width H = Height Dia = Diameter Rad = Radius
Net Wt. = Net Weight (shipping weight may be more)