|
|
 |
RenPaste 4569 Seamless Modeling Paste
|
|
Formerly RP 4569. This material is a high density, heat resistant, 2 component epoxy paste that may be dispensed in a uniform layer over an undersized substructure. Following a 2 day cure and a postcure at 175°F for 8 hours, the RenPaste 4569 may be easily machined to produce a model of excellent surface quality, excellent durability, and heat resistance to 180°F with no evidence of any seam lines. This method is a cost effective alternative to the traditional method of gluing tooling boards together when large contoured tooling is done on a frequent basis.
|
|
Request For Quote & Ordering Information
Catalog
Number |
Description |
UM |
Net
Wt. |
Ship
Note |
Qty |
|
Click Here to View Closeout Specials
S&H - Freeman charges standard published UPS/FedEx shipping rates (unless freight is specified). All orders under $25 are subject to a $5 small order fee. International orders are subject to a $250 minimum order.
SO = Special Order, Minimum Quantities and Extended Lead Times May Apply.
HAZ-G = Hazardous material, cannot ship air, $20 surcharge applied for each package shipped ground
HAZ-A = Hazardous material, cannot ship air, no surcharge for ground shipping
FRT = must be sent by freight carrier due to size, weight, or hazardous classification
T = Thickness L = Length W = Width H = Height Dia = Diameter Rad = Radius
Net Wt. = Net Weight (shipping weight may be more)
|
|
|
|
