|
|
 |
RenPaste 4618-1 Seamless Modeling Paste
|
RenPaste 4618-1 is a medium density epoxy seamless modeling paste that is specifically designed for building large, accurate models and plugs for the marine and aerospace industries. The paste is easy to dispense onto an undersized core in layers of 0.4 to 1.5 inches thick using meter/mix equipment. After curing for 24 to 48 hours at room temperature, RenPaste 4618-1 epoxy seamless modeling paste can be CNC machined to a fine finish.
ORDERING INSTRUCTIONS
To obtain the correct mix ratio, this material requires two drums of resin for every one drum of hardener. Each drum of material is sold separately.
|
|
Request For Quote & Ordering Information
Catalog
Number |
Description |
UM |
Net
Wt. |
Ship
Note |
Qty |
|
Click Here to View Closeout Specials
S&H - Freeman charges standard published UPS/FedEx shipping rates (unless freight is specified). All orders under $25 are subject to a $5 small order fee. International orders are subject to a $250 minimum order.
SO = Special Order, Minimum Quantities and Extended Lead Times May Apply.
HAZ-G = Hazardous material, cannot ship air, $20 surcharge applied for each package shipped ground
HAZ-A = Hazardous material, cannot ship air, no surcharge for ground shipping
FRT = must be sent by freight carrier due to size, weight, or hazardous classification
T = Thickness L = Length W = Width H = Height Dia = Diameter Rad = Radius
Net Wt. = Net Weight (shipping weight may be more)
|
|
|
|
