Epoxy, Urethane & Methacrylate Adhesives Specifications

View the print-friendly version of this spec table (pdf)

View the Araldite Applications & Resistance Properties (pdf)

Note: All product titles link to the respective product pages

Product Number	Mix Ratio Resin to Hrd'nr by wt.	Mix Ratio Resin to Hrd'nr by vol.	Gel Time (min)	Light Handling Time	Cure Time at 73ºF (hr)	Cure Time at 140ºF (min)	Mixed Viscosity (cps.)	Hardness (Shore D)	Lap Shear Strength (psi)	Peel Strength (pli)	Tensile Strength (psi)	Servicable Temperature Typical/Max (ºF)
Epoxy Adhesives
Araldite^® 2010-1	100:100	100:100	10	30 min	3	25	80,000	-	3,300	46	-	105/175
Araldite 2011	100:80	100:100	105	7 hours	10	45	45,000	80	2,700	29	4,800	110/175
Araldite 2012	100:100	100:100	4	20 min	1.75	25	30,000	82	2,700	31	-	105/175
Aralidte 2013	100:60	100:100	75	4 hours	10	40	Paste	80	2,600	23	5,000	110/160
Araldite 2014	100:50	100:50	40	4 hours	5	25	90,000	84	2,600	17	5,500	185/285
Araldite 2015	100:100	100:100	40	4 hours	10	40	Paste	75	2,400	29	3,400	150/212
Araldite 2043	100:100	100:100	1	5 min	1	-	20,000	83	3,100	-	-	flexible
Fastweld 10	100:100	100:100	4	10 min	4	-	250,000	85	2,840	-	3,850	-
AW1258/HV1258	100:100	100:100	23	4 hours	6	-	Paste	89	2,840	-	5,600	-
AW1253/HV1253	100:82	100:100	20	4 hours	6	-	Paste	73	1,990	-	2,130	-
AY557/HY557	100:100	100:100	4	10 min	4	-	14,000	83	2,560	-	4,630	-
AV8503/HV8503	100:92	100:100	30	3 hours	24	60	250,000	78	3.380	-	3,400	250
AV8531/HV8531	100:187	100:200	40	3.5 hours	48	60	310,000	66	3,500	-	2,000	194
AW8535/HW8535	100:75	100:100	60	5.5 hours	16	60	Paste	75	2,500	-	2,290	176
Araldite 8579	100:40	100:40	60	8 hours	8	-	125,000	-	2,500	-	-	248
AW8594/HY994	100:40	100:55	75	-	no suggested	60	7,500	85	3,410	-	6,600	164
TDR-1100-11	100:42	100:50	95	8 hours	24	60	13,000	85	4,100	-	9,000	195
Freeman 505	100:100	100:100	3-5	15 min	4	-	10,400	85	-	-	2,500	200
Methacrylate Adhesives
Araldite 2021	100:90	100:100	3	8 min	20 min	-	45,000	78	3,200	63	-	230
Araldite 2022	100:94	100:100	10	18 min	30 min	-	60,000	75	3,600	23	-	212
MP 55300	100:100	100:100	4-6	10-15 min	-	-	50,000	-	3,000-3,500	-	3,000-3,500	250
MP 55305	100:100	100:100	3-5	6-10 min	-	-	50,000	-	,3,000-3,500	-	3,000-3,500	250
MP 55310	100:100	100:100	10-18	20-35 min	-	-	50,000	-	3,000-3,500	-	3,000-3,500	250
MP 55320	100:10	100:10	8-12	25-30 min	-	-	90,000	-	3,000-3,500	-	3,000-3,500	180
MP 55420	100:10	100:10	4-6	15-20 min	-	-	90,000	-	1,750-2,800	-	2,500-3,500	250
Polyurethane Adhesives
Araldite 2018	100:95	100:100	40	4 hours	16	30	8,000	-	1,160	22	-	flexible
Araldite 2027	100:97	100:100	8	1.5 hours	10	40	Paste	-	2,000	46	2050	77/140
Araldite 2028	100:100	100:100	6	15	5	30	10,400 / 1,200	-	1994	6.5	725	flexible
Araldite 2040	93:100	100:100	15	10 hours	24	120	50,000	30	1,700	-	1,100	flexible
Araldite 2041	80:100	100:100	12	4 hours	16	120	50,000	85A	2,800	-	2,100	flexible
Araldite 2042	80:100	100:100	2.5	1 hour	6	60	50,000	85A	2,800	-	2,100	flexible
Araldite 2055	80:100	100:100	50	6 hours	20	60	Paste	-	1,305	6	-	140/194
AY8650/XMH5090-1	100:500	100:400	80	-	24	180	6,000	-	2,300	-	1,800	140
AY8683/HY8683	100:60	100:60	15	-	24	-	2,750	95A	-	100	3,500	-

Cure Times = Time required for bond to reach 50% of final shear strength of 150 psi or greater
Lap Shear Strength = After 7-day cure @ 73ºF on aluminum
Peel Strength = After 7-day cure @ 73ºF on aluminum
Serviceable Temperature = Typical Tg Value/Max Temperature giving LSS of 750 psi

	For comparison, you may also want to check out:
		Freeman F-Bond Cyanoacrylate Adhesives Specifications
		Ren Tooling Board Adhesives Specifications
		Devon Adhesives Specifications