Bluestar Condensation Cure Silicone Rubber


Excellent for general moldmaking, condensation cure systems feature:

1. Low shrinkage, though not as low as platinum-catalyzed rubber
2. Softer cured hardness (lower durometer) then addition cured materials - excellent for molds with deep undercuts.
3. A tin base catalyst which creates a more inhibition resistant material. However, these rubbers, when cured, may inhibit the curing of urethanes when poured into them.
4. Heat resistance up to 350°F intermittently.

Want the details? View the
Specification Table


Bluestar GP-25 Moldmaking Silicone Rubber

25 A Shore Hardness / 50,000 Viscosity / 150 ppi Tear Strength

V-1062 Moldmaking Silicone Rubber

14A or 15A Shore Hardness / 35,000 or 32,000 cps Viscosity / 120 ppi or 110 ppi Tear Strength

V-1065 Moldmaking Silicone Rubber

25-30A Shore Hardness / 43,000-45,000 Viscosity / High 100-140 ppi Tear Strength

V-1067 Moldmaking Silicone Rubber

37A-40A Shore Hardness / 50,000 Viscosity / Low Shrinkage

V-1068 Special Effects Silicone Rubber (Translucent)

14A Shore Hardness / 25,000 Viscosity / 115 ppi Tear Strength

V-1082 Translucent Silicone Rubber

10A Shore Hardness / 35,000 Viscosity / 120 ppi Tear Strength

VRM-65 Thixotropic Brushable Silicone Rubber

25A or 27A Shore Hardness / Thixotropic / 125 ppi or 120 ppi Tear Strength

RTV 3625 Moldmaking Silicone Rubber

25A Shore Hardness / 20,000 Viscosity / 120 ppi Tear Strength

You may also be interested in

> Silicone Rubber Accessories

> Silicone Rubber V-3040 Sample Kit - Clear Addition Cure

> Mixing Cups & Paddles