Elkem (Bluestar) Condensation Cure Silicone Rubber
1. Low shrinkage, though not as low as platinum-catalyzed rubber
2. Softer cured hardness (lower durometer) then addition cured materials - excellent for molds with deep undercuts.
3. A tin base catalyst which creates a more inhibition resistant material. However, these rubbers, when cured, may inhibit the curing of urethanes when poured into them.
4. Heat resistance up to 350°F intermittently.
Want the details? View the
25 A Shore Hardness / 50,000 Viscosity / 150 ppi Tear Strength
14A or 15A Shore Hardness / 35,000 or 32,000 cps Viscosity / 120 ppi or 110 ppi Tear Strength
25-30A Shore Hardness / 43,000-45,000 Viscosity / High 100-140 ppi Tear Strength
37A-40A Shore Hardness / 50,000 Viscosity / Low Shrinkage
14A Shore Hardness / 25,000 Viscosity / 115 ppi Tear Strength
10A Shore Hardness / 35,000 Viscosity / 120 ppi Tear Strength
25A or 27A Shore Hardness / Thixotropic / 125 ppi or 120 ppi Tear Strength
25A Shore Hardness / 20,000 Viscosity / 120 ppi Tear Strength