News & Updates Products Print Ready Catalog Technical Library Video Library
Site Map
Back to: Home >> Fabrics, Fillers, & Bagging >> Airtech Rubber
View Quote List
Browse Product Line
RenShape, Perfect Plank, & more
Urethane Casting Resin, Silicone Rubber, Epoxy, Plaster, & more
Fiberglass cloth, Carbon Fiber, Airtech Vacuum Bagging Material, Cores & more
Machinable Wax, Sheet Wax, & more
Araldite, TUF Repair, Devcon, & more
Pattern Plastes, Core Vents, Dowels, & more
Plywood & Sheet Materials
Hardware & Equipment
Accessories
Casting Resin & Silicone Rubber Kits, more


 

 

Airtech Airpad Rubber
Airpad is an uncured non-silicone rubber that can be made into pressure caul sheets and flexible mandrels. The Airpad pressure intensifier provides uniform pressure distribution during autoclave processing. This creates toolside part quality on the vacuum bag side of the part. Airpad will take high temperatures similar to silicone rubbers but will not cause silicone contamination. Airpad is not degraded by epoxies, unlike silicones. Airpad is dimensionally stable when reinforced with Toolmaster Prepreg TMGP4100 or TMFP3100. Toolmaster TMGP4100 and TMFP3100 have the same flow and cure temperatures as Airpad making a perfect bond. Toolmaster is a hot melt system that does not give off volatiles from solvents that could also cause delamination.

Airpad must be reinforced with Toolmaster prepreg to stay dimensionally stable.. Never reinforce the male radius if stretch is needed. Airpad is not a release rubber, therefore, it is necessary to bond 2 mil (50m) A4000 bondable one side to the Airpad during fabrication. An alternative release method is to apply Tooltec CS5 to the cured Airpad. We suggest the 2 mil (50m) A4000 bondable one side because the bond lasts longer than the Tooltec CS5. Integrated stiffeners and flexible mandrels can also be fabricated from Airpad. Our flexible mandrels are ideal for closed end tooling. Flexible mandrels can do anything that was previously done by trapped rubber molding.

Due to vendor restrictions, this product may not available in all geographical areas. Please call us or request a quote for details.
airtech-logo.jpg


View the technical datasheet
View the MSDS


Coming soon

Request For Quote & Ordering Information
Catalog
Number
Description
UM
Ship
Note
Qty
 
401618 Airtech Airpad 1/16 x 54" x 50' EA  

Click Here to View Closeout Specials
 
S&H - Freeman charges standard published UPS/FedEx shipping rates (unless freight is specified). All orders under $25 are subject to a $5 small order fee. International orders are subject to a $250 minimum order.

SO = Special Order, Minimum Quantities and Extended Lead Times May Apply.

HAZ-G = Hazardous material, cannot ship air, $27.50 surcharge applied for each package shipped ground.
HAZ-A = Hazardous material, cannot ship air, no surcharge for ground shipping.
HAZ-T = Toxic material, must be sent by freight carrier.

FRT = must be sent by freight carrier due to size, weight, or hazardous classification.

T = Thickness L = Length W = Width H = Height Dia = Diameter Rad = Radius.
Net Wt. = Net Weight (shipping weight may be more).
News & Updates Products Print Ready Catalog Technical Library Video Library
Site Map
Home About Us Contact Us

 

All rights reserved
Disclaimer | Terms & Conditions
Contact Us for product related questions or website related issues