|
|
 |
Freeman offers a wide range of aluminum fillers that are commonly used with epoxies and other tooling resins. Selection of the proper filler for specific applications is largely dependent on the particle size of the filler.
Aluminum Powder is typically added to resin systems in smaller concentrations (up to 10%) for appearance purposes or to increase machinablity or wear resistance. The other sized fillers are used to reduce exotherm, increase casting thickness, and reduce shrinkage. The size of the filler used depends on the size of the tool and other specific requirements.The sizes, from smallest to largest, are:
| Aluminum Powder |
0.0006" |
| Aluminum Sand (Granules) |
0.006"-.040" (100-18 mesh) |
| Aluminum Grain |
0.63" (dia.) x 0.25" to 0.375" long |
| Aluminum Spheres |
0.020"-0.074" (30-10 mesh) |
| Aluminum Shot |
0.125", 0.25", & 0.31" pellets |
| Aluminum Puffs |
0.25" to 0.375" in diameter |
|
|

Request For Quote & Ordering Information
Catalog Number |
Description |
UM |
Net Wt. |
Ship Note |
Qty |
|
Click Here to View Closeout Specials
S&H - Freeman charges standard published UPS/FedEx shipping rates (unless freight is specified). All orders under $25 are subject to a $5 small order fee. International orders are subject to a $250 minimum order.
SO = Special Order, Minimum Quantities and Extended Lead Times May Apply.
HAZ-G = Hazardous material, cannot ship air, $20 surcharge applied for each package shipped ground.
HAZ-A = Hazardous material, cannot ship air, no surcharge for ground shipping.
HAZ-T = Toxic material, must be sent by freight carrier.
FRT = must be sent by freight carrier due to size, weight, or hazardous classification.
T = Thickness L = Length W = Width H = Height Dia = Diameter Rad = Radius.
Net Wt. = Net Weight (shipping weight may be more).
|
|
|
|