News & Updates Products Print Ready Catalog Technical Library Video Library
Site Map
Back to: Home >> Accessories >> Mold Releases - Sacrificial >> PVA-Based Mold Releases
View Quote List
Browse Product Line
RenShape, Perfect Plank, & more
Urethane Casting Resin, Silicone Rubber, Epoxy, Plaster, & more
Fiberglass cloth, Carbon Fiber, Airtech Vacuum Bagging Material, Cores & more
Machinable Wax, Sheet Wax, & more
Araldite, TUF Repair, Devcon, & more
Pattern Plastes, Core Vents, Dowels, & more
Plywood & Sheet Materials
Hardware & Equipment
Accessories
Casting Resin & Silicone Rubber Kits, more


 

 

Partall Film #10
Partall Film #10 is a water and alcohol based polyvinyl alcohol (PVA) coating comprised of water soluble, film forming materials. It is excellent for releasing epoxies, polyesters, and urethanes.

Recommended application procedure is apply wax, then PVA Mold Release then wax again.

PVA is water soluble, so following the use of this release procedure, wash the resulting mold surface using warm water to remove the residual PVA and dry completely.

Caution: When pouring a part from the completed mold where PVA was used as a release agent, DO NOT use PVA again. Possible sticking of the part may occur.

To properly release from a mold where PVA was used as a part of the release procedure, apply 3 coats of wax release only, wiping the excess between coats.


Partall Film #10 is now offered in a single pint can for those who require only a small amount of material and want to avoid the hazardous shipping charges accrued by ordering a gallon size.
partall.jpg


View the technical datasheet
View the MSDS


Liquid Tooling Materials 
Brushes 

Request For Quote & Ordering Information
Catalog
Number
Description
UM
Net
Wt.
Ship
Note
Qty
 
054251 Partall #10 Mold Release 1 Pint EA 0.88
HAZ-A
054256 Partall #10 Mold Release 1 Gal EA 9
HAZ-G
054261 Partall #10 Mold Release 5 Gal EA 42
HAZ-G
054262 Partall #10 Mold Release Clear 5 Gal EA 41
HAZ-G

Click Here to View Closeout Specials
 
S&H - Freeman charges standard published UPS/FedEx shipping rates (unless freight is specified). All orders under $25 are subject to a $5 small order fee. International orders are subject to a $250 minimum order.

SO = Special Order, Minimum Quantities and Extended Lead Times May Apply.

HAZ-G = Hazardous material, cannot ship air, $27.50 surcharge applied for each package shipped ground.
HAZ-A = Hazardous material, cannot ship air, no surcharge for ground shipping.
HAZ-T = Toxic material, must be sent by freight carrier.

FRT = must be sent by freight carrier due to size, weight, or hazardous classification.

T = Thickness L = Length W = Width H = Height Dia = Diameter Rad = Radius.
Net Wt. = Net Weight (shipping weight may be more).
News & Updates Products Print Ready Catalog Technical Library Video Library
Site Map
Home About Us Contact Us

 

All rights reserved
Disclaimer | Terms & Conditions
Contact Us for product related questions or website related issues