FMSC - Specialty Tooling Pastes & Resin Systems

Back to: Home >> Liquid Tooling Materials

Specialty Tooling Pastes & Resin Systems
These epoxy repair materials and paste compounds by Freeman and Huntsman Advanced Materials represent a wide range of specialty tooling materials for unique tool construction, repair, and alteration. Many of these materials are also often used as an alternative to fiberglass cloth reinforcement behind surface coats.

Want the details? View the
Specification Table

Freeman 1010 High-Density Epoxy Paste
Recommended 1/2" in Thickness / 60 Min. Gel Time / 77 D Shore Hardness

Freeman 1015 High-Density Epoxy Paste
Recommended 1/2" in Thickness / 90 Min Gel Time / 65D Shore Hardness

Freeman 1020 Low-Density Epoxy Paste
Recommended 1/2" in Thickness / 40/60 Min. Gel Time / 55D Shore Hardness

Freeman 1030 Polyurethane Reinforcement Paste
Trowelable consistency / 9 Min. Gel Time / 70D Shore Hardness

RenLam 569 Fiber-Reinforced Epoxy Pastes (Blue)
Recommended 1/2" in Thickness / 35 or 50 Min Gel Time / 80D Shore Hardness

RenPaste 1250 High-Density Epoxy Paste
Aluminum-Filled / 28 Min Gel Time / 87D Shore Hardness

RenPaste 1257-3 Highly Filled Fairing Compound
Non-metallic / 28 Min. Gel Time / Creamy Consistency

RenCast 1774 Epoxy Foam System

RenPaste 8281 Granular Backfill (Blue)
Castable up to 8" Thickness / 150 Min. Gel Time / 50D Shore Hardness

RenPaste 177-62 Low Density Tooling Paste
Paste / 65 Min Gel Time / 55D Shore Hardness

Epocast 1610-A1 Epoxy Syntactic
Low density, one component, epoxy syntactic

Epocast 1618 D/B Epoxy Syntactic
Low density, 2 component, epoxy syntactic

Epocast 1628 A/B Epoxy Syntactic
Ultra low density, 2 component, epoxy syntactic

Por-A-Foam
370 cps / 2 Min Gel Time / 4-5 lb/cu ft Density