|
This table includes discontinued items and their recommended alternatives. Go back to the Current Products Only specification table. |
Mix Ratio (by wt.) |
Mix Ratio (by vol.) |
Gel Time (min.) @ 72°F |
Demold Time (hr.) @ 72°F |
Hardness (Shore D) |
Mixed Viscosity (cps) |
Density (g/cc) |
Volumetric Yield (in.3/lb.) |
Shrink (in./in.) |
Compressive Strength (psi) |
Flexural Strength (psi) |
Flexural Modulus (psi) |
Tensile Strength (psi) |
C.T.E. (in./in./°F) |
Deflection Temp. (°F) |
Tg (°F) |
|
|
Room Temperature Surface Coats |
||||||||||||||||
RenGel 1118 (Disc. June 2022) Replaced by Freeman 705 & 706 |
100:9 |
100:13 |
30 |
24 |
90 |
Paste |
1.5 |
19.0 |
0.002 |
13,400 |
6,500 |
– |
3,500 |
2.56 x 10-5 |
235 |
– |
100:14 |
100:20 |
15 |
24 |
90 |
18,300 |
1.4 |
19.6 |
– |
16,800 |
7,000 |
0.76 x 106 |
5,100 |
– |
250 |
– |
|
100:14 |
100:20 |
15 |
24 |
90 |
18,300 |
1.4 |
19.6 |
– |
16,800 |
7,000 |
0.76 x 106 |
5,100 |
– |
250 |
– |
|
100:14 |
100:20 |
15 |
24 |
90 |
18,300 |
1.4 |
19.6 |
– |
16,800 |
7,000 |
0.76 x 106 |
5,100 |
– |
250 |
– |
|
Freeman 701 (Disc. June 2022) Replaced by Freeman 721 |
100:8 |
100:13 |
15 |
24 |
87 |
Thixotropic |
1.5 |
18.7 |
– |
13,200 |
10,800 |
– |
6,100 |
– |
127 |
– |
RenGel 1124 (Disc. June 2022) Replaced by Freeman 721 |
100:18 |
100:27 |
25 |
24 |
90 |
Paste |
1.4 |
19.0 |
0.002 |
14,500 |
10,000 |
– |
6,200 |
2.89 x 10-5 |
127 |
149 |
RenGel 1126 (Disc. June 2022) Replaced by Freeman 721 |
100:18 |
100:25 |
24 |
24 |
90 |
Paste |
1.4 |
19.7 |
0.002 |
12,000 |
6,800 |
0.72 x 106 |
4,700 |
2.60 x 10-5 |
127 |
165 |
100:10 |
6.6:1 |
25 |
24 |
89 |
Thixotropic |
1.55 |
18.5 |
– |
13,800 |
– |
– |
6,800 |
– |
130 |
– |
|
RenGel 1129 (Disc. June 2022) No alternative product |
100:20 |
100:26 |
20 |
24 |
85 |
Paste |
1.4 |
19.9 |
0.002 |
13,900 |
15,500 |
0.49 x 106 |
4,880 |
3.16 x 10-5 |
117 |
156 |
RenGel 3260 (Disc. June 2022) No alternative product |
100:9 |
100:16 |
33 |
24 |
88 |
30,000 |
1.9 |
14.6 |
0.002 |
17,000 |
9,600 |
1.4 x 106 |
6,500 |
2.10 x 10-5 |
138 |
– |
|
High Temperature Surface Coats |
||||||||||||||||
100:11 |
100:18 |
28 |
24 |
88 |
27,500 |
1.6 |
17.76 |
– |
26,500 |
7,950 |
1.3 x 106 |
4,000 |
2.3 x 10-5 |
300 |
350 | |
100:11 |
100:18 |
43 |
24 |
90 |
29,500 |
1.6 |
17.31 |
– |
26,500 |
7,950 |
1.3 x 106 |
4,000 |
2.3 x 10-5 |
300 |
350 | |
100:11 |
100:18 |
90 |
24 |
88 |
25,350 |
1.6 |
17.4 |
– |
26,500 |
7,950 |
1.3 x 106 |
4,000 |
2.3 x 10-5 |
300 |
350 | |
Freeman 945 (Disc. June 2022) Replaced by Freeman 955 |
100:10 |
100:14 |
50 |
24 |
90 |
Thixotropic |
1.4 |
19.9 |
– |
25,000 |
8,000 |
– |
5,000 |
3.7 x 10-5 |
310 |
– |
RenGel 4026 (Disc. June 2022) Replaced by Freeman 955 |
100:10 |
100:14 |
50-150* |
24 |
90 |
Paste |
1.4 |
19.5 |
0.005 |
26,000-27,000* |
8,000-8,700* |
– |
4,000-6,000* |
3.2-3.7 x 10-5* |
300 |
310 |
100:10 |
100:15 |
45 |
16 |
90 |
Thixotropic |
1.47 |
18.9 |
– |
28,000 |
6,500 |
– |
5,800 |
– |
300 |
– | |
RenGel 177-144 (Disc. June 2022) Replaced by Sika ES-215 |
100:10 |
100:15 |
60 |
24 |
92 |
Paste |
1.6 |
17.8 |
0.002 |
28,000 |
12,500 |
0.7 x 106 |
7,000 |
2.4 x10-5 |
300 |
284 |
100:18 |
4.4:1 |
16 |
– |
89 |
60,000 |
1.31 |
– |
– |
21,700 |
8,108 |
339,700 |
7,101 |
– |
277 |
– |
|
100:22 |
3.46:1 |
83 |
– |
88 |
38,000 |
1.23 |
– |
– |
20,820 |
9,253 |
379,100 |
3,593 |
– |
288 |
– |
|
100:17 |
4.8:1 |
180-220 |
– |
89 |
125,000 |
1.23 |
– |
– |
21,690 |
8,416 |
428,400 |
4,938 |
– |
368 |
– |
|
|
ASTM |
– |
– |
D-2471 |
– |
D-2240 |
D-2393 |
D-792 |
D-792 |
D-2566 |
D-695 |
D-790 |
D-790 |
D-638 |
D-696 |
D-648 |
D-648 |
* Depends on hardener used (Ren 1500, Ren 1501, or Ren 1510)